If you’re not familiar with audio clipping, it occurs when the input signal of a sound source (such as a microphone) exceeds what any hardware in between is designed to handle. This can cause distortion, noise, and other audio artifacts that may not be pleasant to listen to.

Usually, a dynamic mic can handle high sound pressure levels before breaking, but some microphones are more susceptible to thumping professional clipping path service. These include condenser and ribbon mics, both of which are more sensitive to sound pressure than dynamic mics.

Can clipping MIC damage it?

Most moving-coil mics can handle SPLs of around 150dB before breaking, which isn’t a volume that can be achieved without the use of a specialized microphone. In extreme cases, however, a thumping sound source could hit the mechanical end stops of a suspension system, which would result in momentary distortion, but it’s highly unlikely that an SPL loud enough to cause this would actually physically damage a dynamic mic.

The biggest problem with yelling or screaming into a microphone is that the diaphragm of most mics can’t tolerate air blasts, which can be caused by vocal plosives. This is why it’s important to avoid yelling or screaming into your mic if possible, and to make sure you don’t use a mic that’s too close to your mouth when recording vocals.

Also, remember to always use a pop filter and adjust your recording levels. Using these tips can help you avoid clipping and deliver great-sounding vocals!